Digital Data...


To work high speed digital data, you will need an ID-1 radio and a computer. In the high speed digital data mode, your ID-1 acts as a LAN extender to access the Internet thru the gateway internet connection. Here are the three steps to set up your ID-1 and computer to use the high speed digital data mode.

ID-1 CONFIGURATION


Program your ID-1 to operate on 1299.7000 simplex (RPS). Set the Mode to DD. Set the callsign parameters as shown below:

Frequency

Call Sign

Operating
Freq

Dup

Offset
Freq

Mode

Your

Rpt1

Rpt2

MYCALL

1299.7000

RPS

0.0000

DD

WA6IRC

WA6IRC A

WA6IRC G

Set to Your Callsign


COMPUTER CONFIGURATION


You will need to set your computer's IP to your D-STAR IP address. If you have registered on a gateway and have "added a terminal", go to your gateway's Personal Information page to get your D-STAR IP address.

Set your computer's IP, Netmask, Gateway and DNS parameters as shown below:

IP
 NETMASK
 GATEWAY
 DNS
Your D-STAR IP Address
 255.0.0.0
 10.0.0.1
 10.0.0.1

ID-1 / COMPUTER CONNECTION


1) Connect the ID-1 Ethernet plug to your computer’s Ethernet port. Use a “straight” cable for extra length.
2) Disable “TXInh” (Transmit Inhibit) on the ID-1.
3) You may now access the Internet through your computer’s browser.

Open Nets Tuesdays 7pm. All Are Welcome!

CONTRACTOR'S SITE
WA6IRC A  DD  1299.700
WA6IRC A  DV  1282.650-
WA6IRC B  DV  447.270- *
WA6IRC C  DV  145.605-
BLUERIDGE SITE
WB6IRC B  DV  446.870- *
WB6IRC C  DV  145.585-
* PENDING COORDINATION


Send comments and mail to Ed, KB6THO
kb6tho@ladstar.org
Copyright 2008 The Independent Radio Club
Last updated by Ed, KB6THO on 7/15/2008
No menu at the top? Click here for a site map.